vncconfig won't start

[James Weatherall]

Hi Alex,

We don't currently provide binaries for Linux x64 or ia64, so you must be
running a third-party compiled version of VNC Free Edition - you'll need to
contact the vendor that provided you with those binaries for support.

Regards,

Wez @ RealVNC Ltd.
 

> -----Original Message-----
> From: vnc-list-admin "at" realvnc.com 
> [mailto:vnc-list-admin "at" realvnc.com] On Behalf Of A. Matzkin
> Sent: 29 September 2006 17:10
> To: vnc-list "at" realvnc.com
> Subject: Re: vncconfig won't start
> 
> I also have exactly the same problem (including the same 
> error message) 
> on an 64 Xeon processor running Fedora 5, and updating the x86-64 
> version of the vncserver didn't solve the problem.
> 
> The only way found to circumvent the problem was to install the i386 
> package of the vnc server, along with the required dependencies. Then 
> the vncconfig utlilty works fine, although it's a bit 
> depressing needing 
> to go back to a code supposedly written for 32 bit processors!
> 
> At least I can cut & paste between my local and remote machines.
> 
> Alex
> 
> 
> 
>     Hi,
> 
>     I am running vnc-server on FC5 (x64).
>     But vncconfig won't come up, it gives the following error.
> 
>     vncconfig
>     X Error of failed request:  BadLength (poly request too large or
>     internal Xlib length error)
>      Major opcode of failed request:  134 (VNC-EXTENSION)
>      Minor opcode of failed request:  1 ()
>      Serial number of failed request:  65
>      Current serial number in output stream:  65
> 
>     It started fine on FC4 (x64 too).
>     I browsed through this list and found the following mail, but this
>     didn't help getting vncconfig starting again.
>     Any hint on what might be wrong?
> 
>     No idea? Anyone?
> 
> 
>     Thanks
>     Markus
> _______________________________________________
> VNC-List mailing list
> VNC-List "at" realvnc.com
> To remove yourself from the list visit:
> http://www.realvnc.com/mailman/listinfo/vnc-list